Operation Manual

Frama Matrix F32/F42/F62

4.6.2.1. Cleaning letter sealer

From time to time, the letter sealer must be cleaned or

have its wearing parts replaced. Use the Clean letter

sealer function.

Press the Restart System key after the cleaning opera-

tion.

The letter sealer is beneath the water tank. Caution:

Always use the Clean letter sealer menu item to re-

move the letter sealer.

If you do not, you may damage the letter sealer mechanism.

How to clean the letter sealer:

Press the Clean letter sealer key. Do not switch the AF/AFS feeder off.

Remove the water tank.

Locate the letter sealer on the rear of the feeder. Press the two unlock-

ing tabs on the sealer module and pull out of the AF/AFS feeder. Take

care not to spill any water.

Hold the letter sealer firmly in one hand and remove the moistener.

Clean or replace the moistener. Replace the cleaned or new moisten-

er, refit the letter sealer in the AF, top up the tank with water and re-

place the tank.

Press the Restart System key.