Operation Manual

Frama Matrix F32/F42/F62
34
Switching the letter sealer on automatically activates the Seal only key. In this event, the mail items
will be sealed, but not franked.
Information
1. If envelopes that have already been sealed are used with the Letter sealer ON function,
this can cause a paper jam as the feeder tries to seal these envelopes again.
2. Never use washing-up liquid additives or other additives which reduce the water surface
tension. Water with a high overall hardness causes leads to shorter service intervals and
should thus be avoided.
3. Always remove the letter sealer and the water tank before transporting the franking sys-
tem. Water could escape and damage the franking system.
Danger
1. Using flammable liquids leads to a high risk of explosion and is therefore prohibited.
2. Transporting the franking system with the letter sealer fitted and filled and the water tank
filled can lead to leaks. There is a risk to life from electric shock.
How to fill the letter sealer unit tank with water:
Remove the tank from the back of the AF feeder by pulling
it upwards.
Unscrew the filler cap (it is on the underside of the tank).
Fill the water tank to a maximum of three-quarters capacity.
Screw the filler cap back on and put the tank back in place.