Operation Manual

Frama Matrix F32/F42/F62

4.6. AF/AFS automatic feeder (Matrix F62 only)

Danger

1. Use accessories intended for this system only. The use of accessories that are not ap-

proved, or not authorized, can be detrimental to the service life of the franking system. At

the same time, a danger to the operator can be created.

2. Always keep your fingers and other parts of the body, ties, necklaces, scarves, open

sleeves and similar loose items away from the feed entry area and the feed rollers. There

is a risk of injury on rotating parts.

3. Never reach into the printing unit. Your fingers could be injured if the franking machine is

switched on. Be careful if you are wearing long hair, a tie, etc.

4. Do not reach into the draw-in range. There is a risk of injury.

5. When the additional tables are removed, do not insert your finger into the open recesses

in the additional tables on the feeder and on the franking system. There is a risk of injury.

6. Do not clean the system with flammable fluids. There is a risk of explosion.

7. Disconnect the system from the mains before cleaning it. Clean the system with a damp

cloth only. Do not spray any liquids on or into the franking system. There is a risk of

electric shock. Lethal hazard.

8. Do not place any liquids, glasses, franking ink, etc. on the franking system.

9. Do not fill the tanks on the sealing device with any flammable liquids. Risk of explosion.

Information

Use distilled water or hardness degree 1 water if you are using the optional letter sealing unit.

Using water of higher hardness grades shortens the letter sealing unit's service life.

4.6.1. Feeder menu

You can control various functions in the AF/AFS automatic

feeder with the Feeder key in the Main Menu.

Press the Devices key in the Main Menu to call up the

Feeder menu by pressing on Feeder.

Some functions are only available to you when the op-

tional letter sealing system is fitted.

4.6.2. Letter sealer (optional)

The AF/AFS automatic feeder can be equipped with a letter sealing system (optional).

You can select whether the letters are sealed (ON) or not sealed (OFF) by pressing the Letter sealer

key. There is no difference in whether envelopes are placed in the AF/AFS feeder open or closed.

The operation of the letter sealer (Letter sealer ON) is shown in the start menus by a stylized symbol

next to the letter symbol ( ).

Tip

You can also press this symbol ( ) to switch the letter sealer on or off.