Operation Manual

Frama Matrix F32/F42/F62
28
4.4.2. Setting the side stop on the AF/AFS automatic feeder
You can process your mail items straight from the stack using the AF/AFS automatic feeder. It is not
necessary for the mail item thickness to be set. The mail items do not have to be fanned out in ad-
vanced.
Further information relating to the AF/AFS automatic feeder may be found from page 33.
You only have to set the mail item width when using the AF/AFS automatic feeder and the side stop
provides support when doing so:
Photo left: Put a small portion of the stack to be franked in the feed and hold the stack firmly.
Photo centre: To move the side stop, grasp it by its black grip, push it up to the stack of letters and
release. The stop moves back a little to give the stack some play to single out the mail items per-
fectly so that they are drawn in smoothly and fault-free. You may now also release the stack of let-
ters.
Photo right: The franking process will start automatically as soon as you release the stack. You can
now add further letters to the stack.
4.4.3. Label dispenser (franking labels, Matrix F42/F62 only)
Please use the built-in label dispenser for mail items of a
thickness of 10 mm or more thick (e.g. parcels).
Press the Label key to do this. Select the number of frank-
ing strips required on the numeric keypad and confirm
your entry by pressing OK.
Your franking system will print the postage rate specified
on the franking strip and eject the labels to the left. Use
original Frama Matrix franking labels only.
To remove the adhesive label, bend the label at the perforation and peel off the backing paper.
The internal label dispenser is not available in the Stack mode of the AF/AFS feeder.
Danger
Always keep your fingers and other parts of the body, ties, necklaces, scarves, open sleeves
and similar loose items away from the feed entry area and the feed rollers. There is a risk of
injury on rotating parts.