Operation Manual

Frama Matrix F32/F42/F62

You can also set the Detail-guided start menu to be the permanent default start menu in the Setup

1 menu (see page 53).

4.3.4. Tariff-guided

Call up the Tariff-guided start menu by pressing the Weight field in the

OneTouch menu. You will also be taken to this menu when batch weighing is

complete.

Then press the Tariff-guided key.

You will be guided through the individual tariff properties one-by-one. The

postage will be calculated once the last item for the tariff has been entered.

You can begin franking once the Ready prompt appears.

You can also set the Tariff-guided start menu to be the permanent default start menu in the Setup 1

menu (see page 53).

4.3.5. Numeric keypad

Postage rates can be entered independently of the mail products using the

integrated numeric keypad.

The numeric keypad is included in the Tariff-guided start menu. Press the

franking value.

Enter the postage value required using the keypad. Confirm the value by

pressing OK. Assign the amount to a category. You can begin franking once

the Ready prompt appears.

The numeric keypad cannot be defined as the start menu.

4.3.6. Postage scales (optional)

There are a number of ways of determining the precise weight of the mail item using S2, S5 or S30

scales.

4.3.6.1. Checking the weight of a mail item when franking

Caution The weight of a mail item can only be checked if you have set the

scales mode to STACK (default setting) in the Setup 3 menu.

Information about the weight is displayed continuously in the top section of

the franking mask (in this case 17g). In view of this, you can have the weight of

a mail item conveniently displayed to you without having to interrupt the

franking process.

The weight display has no effect on the postage rate calculation.