Operation Manual

Frama Matrix F32/F42/F62
21
4.2.5. Changing the cost centre PIN
The cost centres are protected by a PIN by default. In the as-delivered state of the franking system,
the PIN is the same as the cost centre number. The PIN can have up to 4 digits.
Proceed as follows to change the PIN for the current cost centre:
Press the Change PINs key (in Setup 1 or in the CC Manager under
CC Setup).
Enter the old PIN. Press OK to confirm.
Enter the new PIN. Press OK to confirm.
Enter the new PIN again and confirm your input by pressing OK.
You have access to all cost centres in Admin mode (see from page 56).
4.2.6. Changing the cost centre name
Your Frama Matrix franking system offers you the option of assigning an individual name to each
cost centre. It is supplied by default to the Select Cost Centre screen and simplifies your work.
Press the Change PINs key (in Setup 1 or in the CC Manager under CC Setup).
Select Change CC Name and enter the name of the cost centre using the text input screen.
4.2.7. Deleting counter readings of current cost centre
You can delete the counter readings for the current cost centre in the Setup 1
menu or in the CC Manager.
Select the period you wish to delete. Confirm deletion by pressing ENTER. The
selection of periods can be defined in the Admin menu.