Operation Manual

Frama Matrix F32/F42/F62

Enter the Re-set Value desired. Confirm your choice by

pressing OK. The query for the Re-set Value is omitted in

some countries. In this case, the full amount available is

loaded every time.

7. Your Frama franking system establishes a link with

the FramaOnline2 data centre and keeps you in-

formed as to the progress of the connection.

Tip

The connection can last several minutes depending on the amount of data to be transferred

(postage rates update, etc.).

The transaction data is displayed once the connection is completed.

3.3. Inspection/AutoConnect

Your Matrix franking system has an autoconnect function as a convenience. This is used to transmit

the counter readings, to check the postage rate tables and to synchronize data with Royal Mail.

You may see the AutoConnect message while you are changing the Cost

Centre. You can also run this later if you do not wish to make the connection

now.

AutoConnect or delivery of the Mailmark™ data is executed in accordance

with your agreement with Royal Mail. If you see the AUTOCONNECT Inspec-

tion loading successful message, the connection has been made and you can

simply carry on by touching the screen.

It is important that your franking system is permanently connected via the

network for the Inspection/AutoConnect function.