Operation Manual

Frama Matrix F32/F42/F62
16
2.8. FramaOnline2 installation
Installation on the FramaOnline2 data centre establishes the full functionality of your franking sys-
tem and is indispensable for the correct operation of the system.
Information
Information: It may be necessary to configure your franking system to ensure that it connects
successfully with your network. Follow the instructions on page 59 to make the necessary
settings.
A note on installation appears once the system is switched on.
1. Acknowledge the note on installation.
2. Enter the Admin PIN. The default value for this PIN is 1234. Press the OK key.
3. Press the “i“ key at the top right of the screen.
4. Press the Spanner key at the top right of the screen.
5. Press NEXT (arrow) at the top right of the screen.
6. Select FramaOnline2. Press Installation in the FramaOnline2 screen. Start installation by pressing
the YES key.
The franking system will now contact FramaOnline2.
Once FramaOnline2 installation is complete, you will be prompted to install the ink jet cassette.
2.9. Installing the ink jet cassette
Follow the instructions on page 29 to install the ink jet cassette correctly.
2.10. Loading credit from FramaOnline2
You must load postage credit into the franking system before you can frank mail with your Frama
Matrix franking system.
Follow the instructions on page 17. This concludes the installation.