Operation Manual

Frama Matrix F4 / F6
9
1.2.1. Inserting franking labels into manual feeder MF4
Open the label compartment on the manual feeder MF4 by pushing the
slide to the right. Now completely open the flap to the right.
Take a label box out of the packaging and push the box, left end first,
into the channel. Afterwards, press the label box on the right-hand end
into the guideway.
This is how it should look if you have put the label box properly into
place. You can keep a spare box in the compartment shown in front of
the in-place label box.