Operation Manual

Frama Matrix F4 / F6
60
9.5. Frama Matrix F4 / F6 mail item transport
Display message Cause Elimination
Feeder Error
Letter Feeding Error.
Please Adjust Side Guide.
The letter was angulated and
thus not franked.
Feed in the letter again.
Warning!
Current print settings
(Logo and Text)
Are Not Suitable
for Short Letters.
Warning!
Current print settings
(Logo and Text)
Are Not Suitable
for Labels
The printing mark does not fit
onto a short letter or a frank-
ing label.
Temporarily switch off the text or adver-
tising using the selection function.
Please Remove Paper Jam. Paper jam Remove paper jam (see chapter 4.8).
Please insert New Label Box Please insert a new label box
Label dispenser paper jam
Label box not put in place
properly.
Please check it for a correct seating.
Paper jam at feed You are trying to reseal already
sealed envelopes.
Pieces of paper are in the
transport path.
Remove paper jam (see chapter 4.8).
The water tank is missing Put the water tank in place.
The water level is low Top up the water tank.
The letter is too short A letter of this length is not
suitable for the AF6 (min.
format A6).
Please use only envelopes of the A6
format and above.
No display message, but the letter was
not franked and the franking system
beeped three times.
The letter could not be identi-
fied.
Put the letter in place again.