Operation Manual

Frama Matrix F4 / F6

7.3. Set-up menu 3

Set-up menu 3 can be fetched only in the administration mode.

7.3.1. Logo

This is a setting which stipulates whether all cost centres have to work with the

same advertising or whether each cost centre may use individual advertising.

Logo SYSTEM: All cost centres automatically use the advertising defined in

the administration mode. To enable you to stipulate the advertising, the ad-

ministration mode has a corresponding function in the main menu.

Logo CC: Each cost centre can use individual advertising. Whenever a cost

centre is refetched, the advertising is set appropriately.

7.3.2. Inserter Mode

Using this setting, the inserter mode can be predetermined.

Inserter Mode CC: The enveloping mode can be selected for each cost centre.

Inserter Mode SYSTEM: The enveloping mode is predetermined by the system.

7.3.3. Reset Product on Log Off

This setting defines the response of the postal rate module when a cost centre is changed.

Setting ON: The current product is reset and has to be re-entered if a cost centre is changed.

Setting OFF: The current product is kept if a cost centre has been changed.