Operation Manual

Frama Matrix F4 / F6

7.1. Set-up menu 1

7.1.1. Adjusting display

Using the function “Set Contrast”, you can adjust

the contrast to suit your needs. Simply press this

key and use “+“ or “-“ to obtain the desired con-

trast. Acknowledge this setting by pressing Enter.

7.1.2. Language

Several languages are incorporated in your Frama Matrix franking system. Shift to the desired language

using this function. Your current setting is shown in the key. When the administration language is speci-

fied, texts are reloaded that are needed for the postal rate module.

This key has no function in the United Kingdom.

7.1.3. System Info

This key fades in a system overview. This data and the data in the status list provide important input for

our customer service.

7.1.4. Status List

This key fades in a status list. This data and the data in the system information provide important input for

our customer service.

7.1.5. Start-up / Log-off

With this key, you can restart the system after you have made settings. Pressing “Start-up / Log-off”,

takes you straight to the cost centre selection.

7.1.6. Save Start Menu

Here, you can define and save a specific start menu. Possible selections are 1-

Touch, 10-Key Keyboard, Detail Guided or Tariff Guided. In this way, you make

sure that the chosen franking mask is displayed as standard when the cost

centre is selected.

7.1.7. Changing PINs

This serves the setting up of all cost centres in the administration mode or the alteration of the PIN and

name of the current cost centre. Please read chapter 6 “Cost centres and counters” for more detailed

information.

7.1.8. Deleting counters

Please read chapter 6 “Cost centres and counters” for more detailed information.