Operation Manual

Frama Matrix F4 / F6

5.6. Frama Matrix F4 / F6 printing system

Your Frama Matrix franking system utilizes so-called colour cartridges to frank your mail items. The colour

cartrige also contains the printing head. With this in mind, handle the inkjet cassette very carefully and

make sure that no pointed objects, such as paperclips, etc. can damage the sensitive surface of the print-

ing head.

5.6.1. Changing inkjet cassette

If you wish to change your inkjet cassette, press “i”

in the franking mask.

Press the key “Printer settings”.

Press the key “Change Ink-Jet Cassette” and ac-

knowledge this by pressing YES.

Open the top cover flap. Remove the inkjet cassette

by squeezing together the grip surfaces on the

cartridge and pulling it out upwards.

Put in a new inkjet cassette. Make sure that you first remove the adhesive tape

from the printing head.

Push the new inkjet cassette fully into its guide. Adhere to the instructions on

chapter 3 to properly adjust the inkjet cassette. You can repeat this process at

any time if you fetch the function “Print Alignment”.

5.6.2. Adjusting and calibrating printing head

You can restart the processes which take place automatically when a new inkjet cassette is inserted by

pressing the keys “Print Alignment“ and “Print Head New Calibration.

Fetch “Print Head New Calibration” if the franking mark is generally not satisfactory.