Operation Manual

Frama Matrix F4 / F6

5.2.3.2. Printing advertising and text simultaneously

Your Frama Matrix franking system gives you the possibility of printing your

text messages in addition to the selected advertising. You can set this function

by pressing “Logo+Text”.

- Logo+Text ON: Your text will be printed additionally after the advertising.

- Logo+Text OFF: Your text will be printed instead of your advertising.

Note: make sure if logo + text on, ensure the envelope is of sufficient length

Caution! If labels are used, only restricted utilization of this func-

tion is posssible. Your Frama Matrix franking system checks the

length of the franking mark and will give you a cue if the permis-

sible total length is exceeded.

Press “Logo off“ to suppress printing of the advertising for the mark on the

label. As a result, the franking mark shows only the text message. Using the

same procedure, you can cancel printing of the text for the label.

This setting is valid only for the process being carried out at the time.

5.2.4. Canceling advertising

If you wish to frank your mail without advertising or text, you can switch the

advertising on or off by pressing “Logo ON or OFF”.