Operation Manual

Frama Matrix F4 / F6
30
5. Using main menu
5.1. Controls of automatic feeder AF6/AFS6
The “Feeder” key is faded in only when the automatic feeder AF6 is con-
nected. This key is not provided when the manual feeder MF4 is used.
Always keep your fingers and other pars of the body as well as
loose ties, necklaces, bracelets, scarves, open sleeves and similar
things away from the feed entry area and the feed rollers. There is
a risk of injury from rotating parts.
5.1.1. Letter sealer (only AFS6)
On pressing the “Sealer ON/OFF“ key , you decide
whether mail items are sealed (ON) or not sealed
(OFF). There is no difference in putting sealed or
open envelopes in the feeder AF6. Functioning of
the letter sealer (Letter sealer ON) is shown in the
start menus by a stylized symbol next to the letter
symbol (
).
When the letter sealer is switched on, this key
automatically activates “Seal-Only” at the same
time. In this case, the mail items will be sealed, but
not franked.
Caution! If already sealed envelopes are used after you have pressed “Letter sealer ON”,
this can cause a paper jam because the feed tries to seal these envelopes again.
5.1.1.1. “Seal-Only” mode
The “Seal-Only” mode is fetched by pressing the
key bearing these words.
The number of envelopes sealed is counted in the
“Seal-Only”mode by a separate counter. This is an
easy way for you the keep check of the total num-
ber of sealed envelopes.
Press the “Reset Counters” key to set the quantity
displayed on the counter to zero.
On pressing “Exit”, you abandon the mode “Seal-
Only”.