Operation Manual

Frama Matrix F4 / F6
28
4.7. Franking mail items
4.7.1. Franking mail items with manual feeder MF4
The manual feeder MF4 supports FeedControl which makes sure that your mail items
are always franked correctly. As a result, invalid postage marks are now a thing of
the past.
To feed in mail items, lay the mail item flush against the rear boundary of the feed
table. Push the mail item to the left into the Matrix franking system. The feed rollers
pull in the mail item and it is franked.
Mail items fed in at an angle are not franked thanks to FeedControl. Feed in these
unfranked mail items again, but square, for franking.
4.7.2. Franking mail items with automatic feeder AF6/AFS6
You can process your mail items straight from the stack by using the automatic feeder AF6. It is not nec-
essary for the mail item thickness to be set. The mail items do not have to be fanned out in advanced.
Keep your fingers and other parts of the body as well as loose clothes, ties, scarves,
bracelets and necklaces away from the feed inlets of the system. There is a risk of injury
from rotating parts.
You only have to set the mail item width when using the automatic feeder AF6. The side stop is a help
when you do so:
Put a small part of the stack to be franked in the feed and hold the stack
firmly. Push the side stop up against the stack and let it go.
Pull back the side stop a little to give the stack some play for proper sin-
gling out of the mail items so that they can be drawn in without any dis-
ruption
Use of the supplied magnetic wedge is recommended when procesing
heavy and stiff mail items. It has to be mounted at the respective format
marking on the metal rail.