Operation Manual

Frama Matrix F4 / F6

5. Press “Forward” (arrow symbol).

6. Select “FramaOnline2”.

7. Press the key “Activation PIN”.

8. Enter the FramaOnline2 Activation PIN using

the faded-in numerical keyboard and ac-

knowledge your entry by pressing OK. Later,

the FramaOnline2 activation code no longer

needs to be entered. Take care to enter the

code without an error otherwise it will be re-

jected by the Matrix franking system or the

FramaOnline2 data centre.

9. Select “Installation”. TER.

10. Your Frama Matrix franking system establishes a link with the FramaOnline2 data centre. This process

can take up to 2 minutes. If the link cannot be established, please check the modem settings. In this

respect, please refer to point 8.6.1.

11. You will now have been logged into the FramaOnline2 data centre. You will receive a corresponding

message in the display.

12. The display is shown for 8 seconds. After this time, you will find yourself

back in the FramaOnline2 menu.

13. Press “ESC” twice to go to the Set-up menu 1. Press “Start up/Log off” to

go to cost centre selection.