Operation Manual

Frama Matrix F4 / F6

This is how you fill water into the tank of the sealing device.

Remove the tank from the back of the feeder AFS6 by pull-

ing it upwards.

Screw off the filler cap (it is at the bottom of the tank). Pour

in distilled water until the tank is three quarters full. Screw

on the filler cap again and put the tank back into place.

1.4. Further installation steps Matrix F4 and Matrix F6

1.4.1. Establishing modem link

Connect the modem cable (small square plug) with the

Matrix franking system at the socket (jack) marked with the

telephone symbol.

Afterwards, connect the other end of the telephone cable

into a suitable analogue modem telephone socket.

When starting up the first time, we recommend that you

use an existing analogue fax connection.

1.4.2. Connecting scales (optional)

Unpack the scales and, if required, the scales platform

(accessory for extra price). Position the scales next to your

Matrix franking system or on the scales support.

Connect the scales cable with the scales connection, which

is also at the back of the Matrix franking system and marked

with scales

Symbol.