Operation Manual

Frama Matrix F4 / F6
10
1.3. Installation notes Matrix F6 and AF6/AFS6
Position the Matrix F6 and automatic feeder AF6/AFS6 next to each other at the place of installation, as
shown in photo 9. The connecting pins on the Matrix F6 must be inserted into the guide holes in the
automatic feeder AF6/AFS6.
Keep in mind the positions of the connecting pins on the F6 and the guide holes in the feeder AF6/AFS6:
Photo 7: Matrix F6 with connecting pins Photo 8: Automatic feeder AF6 with guide holes
Align the Matrix F6 and the automatic feeder AF6/AFS6, as shown in photo 9, and then push the feed
guide holes carefully over the connecting pins.
Photo 9: Positioning of Matrix F4 and automatic feeder AF6 Photo 10: Automatic feeder AF6 not yet locked
Depress the silver-coloured button, shown in photo 11, and push the automatic feeder AF6/AFS6 firmly
up against the Matrix F6 housing. Release the silver-coloured button. The feeder AF6/AFS6 will now be
locked in place.
Photo 11: Depress the silver-coloured locking button