Operation Manual

Frama Matrix F4 / F6
8
1.2. Installation notes for Matrix F4
Position the Matrix F4 and manual feeder MF4 next to each other at the place of installation, as shown in
photo 3. The connecting pins on the Matrix F4 must be inserted into the guide holes in the manual feeder
MF4.
Keep in mind the positions of the connecting pins on the F4 and the guide holes in the manual feeder
MF4:
Photo 1: Matrix F4 with connecting pins Photo 2: Manual feeder MF4 with guide holes
Align the Matrix F4 and the manual feeder MF4, as shown in photo 3, and then push the feed guide holes
carefully over the connecting pins.
Photo 3: Positioning of Matrix F4 and manual feeder MF4 Photo 4: Manual feeder MF4 not yet locked
Depress the silver-coloured button, shown in photo 5, and firmly push the manual feeder MF4 up against
the Matrix F4 housing. Release the silver-coloured button. The manual feeder MF4 will now be locked in
place.
Photo 5: Depress the silver-coloured locking button. Photo 6: Connecting manual feeder MF4 and Matrix F4