Operation Manual

Frama Matrix F22
42
8. Admin mode
Settings made in the Admin mode always apply to all cost centres. In Admin mode you also have
access to all cost centres and can thus conveniently make settings for these cost centres (counter
readings, name and PIN). The additional features demanded by Admin mode are described below.
Tip
You can also make settings in each cost centre. However, when you do this not all the Admin
mode functions are available to you.
8.1. Log in
Admin mode is selected by pressing the Admin key from
the Select Cost Centre screen. This mode is always
password-protected, even if you have switched off PIN
Code entry for the cost centres.
Press the Admin key to access Admin mode. Enter your
PIN. The default PIN is 1234.
Confirm your PIN Code input by pressing OK.
Tip
Save the PIN for the Admin mode in a safe place. The PIN can only be reset by a service
technician at your premises or in the central workshop. This service is chargeable.