Operation Manual
Frama Matrix F22
24
4.3.6.2. Using a mail item weight for postal rate calculation
In the detailed overview or the postage rate calculation, press the Weight key
followed by the Scales key to use the weight displayed to calculate a postage
rate.
Alternatively, you can also influence the postage calculation by selecting a
weight class.
4.3.6.3. STACK/SINGLE weighing mode
Stack weighing mode, with its two variants, is a special feature. Switch the stack weighing mode
between Stack and Single in the Main Menu under Devices.
STACK mode (default)
Place a stack of letters (recommendation: sorted by format) on the scales. The
total weight of the stack will be shown in the top section of the display. Select
a OneTouch key the content of which is nearest to the mail items in the stack.
Take a letter from the stack. The display changes to stack weighing mode.
The Weight key provides information as to the weight of the mail item
removed. The postage is calculated on the basis of this weight. Frank the
letter.
Take the next letter from the stack. The weight of the letter is displayed and
the postage calculated accordingly and so on. Once you have removed the last letter from the
stack, the stack weighing mode will quit after 3 seconds.
You still have access to the type of mailing, format, destination and additional services when you
are in the stack weighing mode.
SINGLE mode
Place a letter on the scales. The weight is determined and automatically
transferred.
The display changes to single weighing mode. The Weight key provides
information as to the weight of the mail item placed on the scales (here: single
17 g). The postage is calculated on the basis of this weight. Frank the letter.
Place the next letter on the scales. The weight of the letter is displayed and
the postage calculated accordingly and so on.
Where necessary, you can adjust individual details for the postage rate. The postage is determined
and specified automatically. You can now frank the mail.
Tip!
You may switch between the STACK or the SINGLE mode using the „Stack“ or the „Single“
buttons during scale operation .