Operation Manual

Frama Matrix F22

7. Press Activation PIN. Enter the five-digit FramaOnline activation PIN using

the numeric keypad displayed and confirm your input by pressing Enter.

There is no need to enter the FramaOnline activation PIN again. Take care

to enter the PIN correctly otherwise it will be rejected by the Matrix F22 or

the FramaOnline data centre.

8. Select Install. Confirm the process by pressing YES.

9. Your Frama Matrix F22 will now establish a connection to the FramaOnline2

data centre. This process can take up to 2 minutes. Please check your

network setup if the connection cannot be established. Refer to section 9.4.

Connection.

10. You have now registered with the FramaOnline2 data centre.

11. The display is shown for 8 seconds. Touch the screen to quit the message.

You will then be returned to the FramaOnline2 menu.

12. Press ESC to enter Setup menu 1. Press Start up/Log off to go to Select Cost Centre.

2.6. Installing the ink jet cassette

Follow the instructions on page 26 to install the ink jet cassette correctly.

2.7. Loading credit (postage) from FramaOnline2

You must load postage credit into the franking system before you can frank mail with your Frama

Matrix franking system.

Follow the instructions on page 17. This concludes the installation.

Install?

Perform Install?