Operation Manual

Frama Matrix F2

8.1.1. Set-up 1 menu

1. Change contrast: You can alter the contrast of your

display with this. The standard setting is 50. Press the +

and - keys to adjust the value and acknowledge your

setting with ENTER.

2. Start up / Log off: Use this to restart your Matrix F2

after you have made changes to the basic settings.

Pressing the key once, restarts the Matrix F2 immediately.

3. Saving start menu: This is for defining the desired start page (OneTouch, 1-10 numeric keypads,

Tariff Guided).

4. Change PIN: Touching this key brings you to user

administration. Here you can change the cost centre

name and the respective PIN codes.

Changing cost centre name: Select the cost centre to be

changed by pressing the respective key. Press “Change

CC name“. Enter the name of the cost centre in the same

way as for entering a text print. Acknowledge the name by pressing ENTER.

Changing PIN: Press the key “Change PIN” and enter the current PIN. Press “ENTER”. Enter the

new PIN. Acknowledge the new PIN by pressing ENTER. For safety reasons, you will be requested

to enter the PIN again. Press ESC to return to the Set-up 1 menu.

5. Deleting counters: This is for maintaining the cost centre counters. Select the cost centre whose

resettable counter has to be set to zero. Press ENTER to delete the piece reading and value.

Suitably acknowledge the security query.

8.1.2. Set-up 2 menu

1. System Information: This displays system data that

might be useful when you obtain advice on the phone

after a system malfunction / breakdown. Touch the

keypad to leave the display.

2. Status list: This shows system messages which might be

helpful when you are obtaining advice on the phone.

Touching the keypad, ends the display.

3. Credit warning: Here you can define the minimum postage credit level at which you wish to be

notified. The standard value is 1,500.00 Rs.

All screens shown in this chapter are for reference only and may differ from

your local presentation.