Operation Manual

Frama Matrix F2
19
4.2. OneTouch
On pressing a product key (OneTouch key), a product is pre-
selected. After having applied the weight using the scale the
letter symbol appears, signalizing that you can go ahead and
frank your mail item.
If you wish to frank another product, simply pre-select it by
pressing the respective OneTouch.
Pressing the selected OneTouch key again, will bring you to detailed display of the respective product.
Here, through specific selection, you can change individual aspects of the selected product and apply
the weight to the product.
The following pages describe how the predefined arrangement of the OneTouch keys and thus the
products can be adapted to suit your needs.
General notes
The following notes are intended to support you in achieving a sharp, professional postage mark with
your Frama Matrix F2.
- Don’t frank mail items that are thicker than 10 mm. If you do, you will run the risk of the printing
head touching the surface of the mail item and thus smearing the franked mark. With this in
mind, always use original Frama Matrix F2 franking labels for thick mail items and small parcels.
- Please make sure that no pointed objects, such as paper clips, are near the franking zone.
- If you have the impression that lines are missing in the franked mark, please carry out a printing
head test.
- Don’t use very absorbent or fibrous envelopes which could prevent a sharp mark from being
obtained. This could make your franking invalid.
- A certain time after franking, the printing head is sealed to prevent the individual jets from drying.
During this time, “Touch and go!” appears on the ComTouch. Touch the ComTouch™ to
continue.