Operation Manual

Frama Matrix F2
15
3. Frama Matrix F2 printing system and inkjet cassette
Caution! Please first put the inkjet cassette in place before
you press “YES” on the shown display.
Your Frama Matrix F2 uses an ink jet cartridge to frank your
mail items. The inkjet cassette also contains the printing head.
With this in mind, handle the inkjet cassette very carefully and
make sure that no pointed objects, such as paperclips, etc.
can damage the sensitive surface of the printing head.
3.1. Putting inkjet cassette in place
Unpack your inkjet cassette and remove the two protective strips
from the printing head.
Don’t touch the gold-coloured contact surfaces. Grease and
perspiration on your skin can leave a film which could results in
“messy” print marks.
On the top of the inkjet cassette you will find two grip surfaces.
Press them together between your thumb and forefinger.
Open the cover flap at the top on the left of the Matrix F2. The
printing carriage will already be in the standby position, waiting for
the inkjet cassette to be put in place.
Put in the inkjet cassette from above. When doing so, make your
movement trace the contour of the cover flap.
Push the new inkjet cassette fully into its guide.
Release the grip surfaces. Press back the inkjet cassette with one
finger to make sure the locking pins are correctly positioned.
The locking pins must engage at the side. Check that the inkjet
cassette is properly seated before you close the cover again (see
photo). The cover must close easily without you applying any
force.