Operation Manual

Frama Matrix F2

7. Select “Re-set”.

8. Your Frama Matrix F2 will now establish a link with the FramaOnline2 data centre. If the link

cannot be established, please check the modem settings. The link can last several minutes,

depending on the amount of data to be transferred (postal rate update, etc.).

9. The transaction data will be displayed. The loading process has been completed satisfactorily.

Wait until the display exits itself and then press ESC. Press the return arrow to get back to Set-up

1 menu. Press “Start up / Log off” to go to cost centre selection.

10. Your Matrix F2 is now ready for use.