Operation Manual

Frama Matrix F12

5.6.3. Changing the ink jet cassette

Information

Caution! Make sure that the ink jet cassette has been stored at room temperature for at least three

hours before you fit it.

Press the Change Ink Jet Cassette key in the Main Menu and

confirm by pressing YES.

Open the top cover flap. Remove the ink jet cassette by

squeezing together the grip surfaces on the cassette and

pulling it out upwards.

Follow the instructions on page 25 to install and align the

new ink jet cassette and print head correctly.

5.6.4. Print alignment

Use this function to run the adjustment of the print quality for franking separately. Normally, alignment is

run as part of the configuration following a change of ink jet cassette.

5.6.5. Print h

ead new calibration

Rec

alibrate the print head (ink jet cassette) if the overall print quality is not satisfactory.