Operation Manual

Frama Matrix F10 / F12

5. Press the Tool key to obtain the basic settings. The

basic settings are divided among four menus. These

are designated as Setup 1, Setup 2, Setup 3 and Set-

up 4.

Pressing the arrow moves you forward, while pressing

ESC returns you to where you started.

7.2. Setup 2 menu

1. System Info: This displays system data that might be

useful when you obtain advice on the phone after a

system malfunction/breakdown. Touch the screen to

quit the display.

2. Status List: This shows system messages which might

be helpful when you are obtaining advice on the

phone. Touching the screen quits the display.

3. Credit Warning: Here you can define the level of remaining postage credit which, when it is

reached, will trigger a notification. The default value is £100.00.

4. High Value: This setting determines that amount from which, for security reasons, you must

confirm the postage value before this amount can be franked. The default setting is £10.00.

Enter the new desired value and confirm your input by pressing ENTER.

5. Max. value: This defines the maximum value which can be franked on a mail item at one time.

The default value is £99.99. Enter the desired value and acknowledge your entry by pressing

ENTER.

7.3. Setup 3 menu

1. Beep ON: Used to switch the key beep on and off.

Pressing Beep ON switches off the beep. Pressing it

again switches the beep back on.

2. CC Clear ON/OFF: Using this function, you can de-

fine whether the users of the individual cost centres

may or may not delete their cost centre contents

(counter readings and values). Selecting CC Clear

OFF means that only you are allowed to reset counters in Admin mode.

3. Auto Log off: Defines the time in minutes until the current cost centre will be closed and the

user logged off. A cost centre must be selected again before work can continue.

Auto Log off activation and setting Auto Log off time: Press the Auto Log off key. Enter the de-

sired time. Entering zero minutes switches the Auto Log off function off. Press ENTER to ack-

nowledge.