Operation Manual

Frama Matrix F10 / F12

5.6.3. Changing the ink jet cassette

Information

Caution! Make sure that the ink jet cassette has been stored at room temperature for at least

three hours before you fit it.

Press the Change Ink Jet Cassette key in the Main Menu

and confirm by pressing YES.

Open the top cover flap. Remove the ink jet cassette by

squeezing together the grip surfaces on the cassette and

pulling it out upwards.

Follow the instructions on page 26 to install and align the

new ink jet cassette and print head correctly.

5.6.4. Print alignment

Use this function to run the adjustment of the print quality for franking separately. Normally, align-

ment is run as part of the configuration following a change of ink jet cassette.

5.6.5. Print head new calibration

Recalibrate the print head (ink jet cassette) if the overall print quality is not satisfactory.