Operation Manual

Frama Matrix F10 / F12
34
5.5. Info Print
You can set various print modes for your Frama Matrix F10 / F12 franking system using the Info
Prints. The reports are particularly important. These allow condensed information to be printed out.
These reports help you by providing overviews when you are programming or, for example, they
may be used as receipts after loading postage via the FramaOnline2 data centre.
You can call up further Info Prints by pressing the Next key (right arrow).
5.5.1. Printing out reports
Press the key appropriate to the report you want and feed
a C5/6 format envelope into your Frama Matrix F10 / F12
franking system to print the report.
You can quit the Info Print menu by pressing ESC.
5.5.2. Received stamp
You can convert your Frama Matrix F10 / F12 franking system into a received stamping machine.
Select the Date Stamping function in the Info Print menu. This mode changes to a different franking
mark. No postage is used.
5.5.3. FramaOnline2 report
The FramaOnline2 report acts as a receipt for the current transaction. You receive information
about the sum loaded and the composition of the current credit. The check amount corresponds to
the total of all amounts loaded, and it also helps you when you check your transactions.
There are also other FramaOnline2 related reports available when you press the arrow key
(Proforma Invoice and FO2 Statement).
5.5.4. Logo imprint
The Logo print function in the Info Print menu allows you to print the advertising imprint only. All
relevant postage information is hidden. This mode does not consume postage.
5.5.5. Setup report (setup settings)
The setup report summarises certain settings of Setup menu 2 (Admin mode) in a clear layout.
5.5.6. CC report
The cost centre report is a clearly laid out report of the data for the current cost centre or for a se-
lected cost centre (Admin mode). You receive the cost centre data for the periods and the overall
counter level (not resettable).