Operation Manual

Frama Matrix F10 / F12
25
4.4. Franking
It is only possible to frank mail items when the Ready prompt (letter icon) is showing in the display
(see page 10).
4.4.1. Inserting and franking the letter
You can now frank your mail item with the selected postage
rate. To do this, place your mail item in your Frama Matrix
F10 / F12 franking system so that the right-hand edge is flush
against the housing and push the mail item back to the stop.
The letter will be franked.
4.4.2. Franking labels
Use only original Frama Matrix F10 / F12 franking labels. Frank labels in the normal way, just like a
letter. Frama Matrix F10 / F12 franking labels can be used twice. Turn the label through 180 de-
grees and frank it again.
To remove the adhesive label, bend the label at the perforation and peel off the backing paper.
Danger
1. Use accessories intended for this system only. The use of accessories that are not ap-
proved, or not authorised, can be detrimental to the service life of the franking system.
At the same time, a danger to the operator can be created.
2. Always keep your fingers and other parts of the body, ties, necklaces, scarves, open
sleeves and similar loose items away from the feed entry area and the feed rollers. There
is a risk of injury on rotating parts.
3. Do not clean the system with flammable fluids. There is a risk of explosion.
4. Disconnect the system from the mains before cleaning it. Clean the system with a damp
cloth only. Do not spray any liquids on or into the franking system. There is a risk of
electric shock. Lethal hazard.
5. Do not place any liquids, glasses, franking ink, etc. on the franking system.