Operation Manual

Frama Matrix F10 / F12

3. FramaOnline2

3.1. General notes

FramaOnline2 will deal with preparing the postage rates, sending use data to the Royal Mail

and

provides a simple way of loading new postage credit onto your franking system.

Your franking system must set up a connection with the data centre to allow use of FramaOnline2.

Refer to section 9.4. Connection on page 44 for this.

Tip

It is only possible to call up postage and communicate with FramaOnline2 in Admin mode.

Tip: The Admin mode is password (PIN) protected. Keep your PIN in a safe place. The PIN

can only be reset in a chargeable call-out of a service technician to your premises or in the

central workshop.

3.2. Loading postage credit

It is only possible to load postage credit in Admin mode. The Admin mode is password-protected.

Switch the device on or change to Select Cost Centre.

1. Press the Admin key in Selection mode.

2. Enter your PIN (default: 1234). Then press the ENTER

key to access Admin mode.

3. Press the “i“key.

4. Press the Spanner.

5. Press the arrow.