Operation Manual

Frama F-Link
14
3.2 Configuration Page Management
On the configuration page Management you can set your own administrator username and password for
the access to the F-Link configuration page.
3.2.1 Modem S91 setting (only applicable to F-Link a/b versions)
The modem S91 setting changes the attenuation of the internal modem in F-Link. This option is only rele-
vant for Frama franking systems of the Matrix F series range. The attenuation can be switched between
two values:
S91 OFF default attenuation
S91 ON higher attenuation
The higher attenuation / S91 ON is only recommended if you experience problems with the modem com-
munication between F-Link and the Matrix F series franking system (frequently no answer / no connection
build up or connection lost during communication).
The first pressing of the S91 ON button after a reset of F-Link initializes this feature internally only. Press
the S91 ON button a second time to change the value. The current status shows the actually state of the
modem S91 setting.
If the modem S91 setting was changed try multiple connections before estimate the effect. In special
cases also a decreasing of the modem speed on the Matrix F series franking system might also help to get
a more stable communication performance.
Frama F-Link
15
3.3 Configuration Page LAN Settings
On the configuration page LAN Settings you can change the LAN connection type, set values for the LAN
connection type and set the proxy settings for F-Link.
The usage of the connection type is descibed in chapter 2.1.
3.3.1 DHCP hostname
An optional hostname for the F-Link can be set on DHCP mode into the field “Hostname”, e.g. “FLINK”.