Operation Manual

Frama F-Link
12
21. Open configuration page Administration – Status. Check if F-Link gets the correct IP settings from
the wireless network.
22. Check the F-Link status. Must be “Ready To Connect”.
23. Execute business processes on the franking system.
Remark!
Don’t enable the wireless function, when F-Link is connected to a LAN network
with DHCP server!
Connect the F-Link device directly to a PC for configuring it for wireless operation.
After enabling the wireless function the F-Link still uses the default IP 192.168.1.200 on
the LAN connection as long as the wireless network connection was not successfully build
up.
Frama F-Link
13
3 Configuration Page Features
3.1 Login
Enter the IP address of the F-Link into the address field of the internet web browser.
Enter the username and the password into the login window:
(Default username: “admin” and password: “admin”)
Press button OK.
Now you are on the home screen. Over the configuration page you can change the settings of the F-Link,
display the actual status and the logged data. Use the menu on the left side to navigate.
All changes on the configuration page are stored only when you press the “Apply” button below the
settings fields.