User Manual

Installation Bulletin:
Bulletin d’installation :
Boletín de Instalación:
Estimated time of installation:
Temps estimé pour l’installation :
Tiempo estimado de instalación:
Application:
Application:
Aplicación:
Importado por:
FRAM Group Operations Mexico City S.A. de C.V.
Carretera México-Cuautitlán km 31.5 S/N
Nave 5, Conjunto Industrial Cuautitlán.
Col. Loma Bonita
Cuautitlán, Edo. de México
MEX, C.P. 54800
Tel. [phone]
Hecho en China
FRAM Group Operations LLC
Danbury, CT 06810-5109 U.S.A.
©2012 FRAM Group IP LLC
FRAM Group (Canada) Inc.
2430 Meadowpine Blvd.
Unit 105 & 107
Mississauga, ON
L5N 6S2 Canada
SOME VEHICLES MAY DIFFER SLIGHTLY. IF YOU HAVE QUESTIONS
REGARDING THIS FILTER, ITS INSTALLATION OR MORE DETAILS
SPECIFIC TO YOUR VEHICLE, PLEASE VISIT
www.framfreshbreeze.com
FOR HOW-TO VIDEOS AND ADDITIONAL INFORMATION.
CERTAINS VÉHICULES PEUVENT PRÉSENTER DES DIFFÉRENCES. SI VOUS
AVEZ DES QUESTIONS CONCERNANT CE FILTRE, SON INSTALLATION OU
DÉSIREZ OBTENIR PLUS DE DÉTAILS CONCERNANT VOTRE VÉHICULE,
VEUILLEZ VISITER LE www.framfreshbreeze.com POUR OBTENIR
DES DÉMONSTRATIONS VIDÉOS ET PLUS D’INFORMATION.
PUEDE VARIAR UN POCO EN ALGUNOS VEHÍCULOS SI TIENE PREGUNTAS
SOBRE EL FILTRO Y LA INSTALACIÓN O DESEA INFORMACIÓN EN DETALLE
PARA SU VEHÍCULO, VISITE www.framfreshbreeze.com, DONDE
ENCONTRARÁ VIDEOS INSTRUCTIVOS E INFORMACIÓN ADICIONAL.
For more application specifics,
please refer to our catalog.
Pour obtenir plus d’information
sur les applications, veuillez
consulter notre catalogue.
Para obtener información
específica sobre la aplicación,
consulte nuestro catálogo.
CF10561
07-10
Jaguar S type, Lincoln LS
TOOLS: May need Standard Screwdriver.
LOCATION OF CABIN FILTER: On the passenger side of the vehicle in front of the windshield under the cowl vent screen.
REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.
1. With hood closed locate the push type pin on the far passenger end of the cowl vent screen. (Fig 1) Remove this pin by
pushing in on the center button and pulling the pin free from the cowling. If the pins do not come loose you may use the
standard screwdriver to gently pry the pin loose once the center of the pin is pushed in.
2. Open the hood and remove the remaining 6 to 7 push type pins along the front edge of the cowl vent screen. (Fig 2)
3. Once the push type pins are removed, gently pry up the front edge of the cowl vent screen on the passenger side. (Fig 3)
4. You will see a hinged lid in the opening of the cowl vent screen on the passenger side. Unlatch this lid on the front edge and
open the hinged lid. (Fig 4)
5. Remove the dirty filter by pulling it out of the housing and replace it with a clean filter. (Fig 5)
6. Close the lid and re-secure the latch.
7. Reposition the cowl vent screen and align the holes for the push type pins. Re-install the 6 to 7 pins with the center portion of
the pin protruding up and insert the pin in the hole. Once the pin is in the hole, push in on the center of the pin until the center
is flush and the pin is secure.
8. Close the hood and put the last pin in place on the far passenger side of the cowl and secure it as you did the other pins.
15 minutes or less
15 minutes ou moins
15 minutos máx.
1
2
43 5
pin | cheville | pasador