User Manual

3D FPV camera The BlackBird 2
User manual
11
2016
fpv3dcam.com
4. Maintenance and calibration
4.1. Lens focus adjustment
If an image displayed by the BlackBird 2 is blurred, the lenses should be focused.
Table 3 Examples of possible lens focus options. Format 3D SIDE BY SIDE
A blurred image (focusing required
on the left lens
on the right lens
on both lenses
A sharp image on both lenses (focusing not required)
In order to adjust the focus, go through the following steps:
 Connect the BlackBird 2 to a monitor or video eyepieces, connect the
BlackBird 2 to a power source;
 Turn off the 3D mode at the monitor / video eyepieces and switch the
BlackBird 2 in 3D SIDE BY SIDE mode;
 In the image on the monitor / video eyepieces identify objects in need to be
in focus;
 Loosen the screw fixing the lens;
 Turn the lens left or right to obtain a sharp image of the desired range;
 Tighten the lens screw;
 Repeat these steps for the second lens, if necessary.