User Manual

3D FPV camera The BlackBird 2
User manual
10
2016
fpv3dcam.com
3. Connect to PC and update software
To connect BlackBird 2 to a personal computer or laptop will need a cable Mini USB
- USB.
Before connecting the USB cable, disconnect camera from all power sources.
The BlackBird 2 is connected to a power source (e.g. Li-Po battery) can damage your
PC
Picture 5: The scheme of connection of PC
Software update on the camera BlackBird 2:
 launch the app BlackBird 2 Assistant
 connect the camera to PC via Mini USB cable – USB port, first disable the
camera from all power sources. When properly connected in the right part of
the main window to show the serial number of the camera (see Picture 6)
Picture 6: Main window BlackBird 2 Assistant
 click "UPDATE" and select the firmware file. Wait until the update is
completed
If successful, the program updates the microcontroller, to receive a message, for
example - Write ATmega 38s, 744Byte/s
If successful, the program updates the FPGA chip, the message, for example –
Write FPGA 223s, 2415Byte/s