User Manual

3D FPV camera The BlackBird 2

User manual

2016

fpv3dcam.com

2.3. Use of the menu

Adjusted and correctly connected the camera starts to operate immediately after

power-up. A lit up green LED 13 (see Picture 2) indicates the power supply is on.

Table 2: Menu

count of fast flashing green LED «MENU»

name and description of the menu item

Selecting video mode – allows you to select

an outgoing video format

1. Side by side 3D crop 16x9

2. Side by side 3D crop 4x3

3. Side by side 3D full frame

4. Side by side 3D manual cropping

5. Interlaced 3D

6. 2D

change of right for left – for swapping the right

and left images (switch images)

image shift – this menu item lets you adjust the

convergence in SBS crop modes

stretch / zoom images horizontally – serves to

adjust the cropping of SBS in manual mode

selecting the exposure – allows you to select one

of four modes of light metering

1. Across the frame

2. At the center of the frame

3. In the bottom half of the frame

4. In the upper half of the frame

To change a menu item, use the «МЕNU» button, to change the settings of the menu

item use the «NEXT» and «ВACK» buttons.