User Manual

3D FPV camera The BlackBird 1
User manual
2016
fpv3dcam.com
2
1 Description and operation
1.1 Product description
Stereo video camera BlackBird 1 (further in the text "camera" or "product") is
designed for generating a video signal in the interlaced 3D format. The camera
generates stereo image in real time, and small size, support power supply input voltage
in the range from 5V to 12V and variable stereo base, making it versatile and easy to
use.
For the wireless transmission of stereo image from the camera to your 3D monitor or
3D video goggles, you can use an analog video transmitter. Recording is done with the
help of video capture devices.
The main area of use BlackBird 1 - FPV (first person view), as the steering cameras on
radio-controlled model quadrocopter, airplane, car, robot platform.
1.2 Specifications
Table 1
Video sensor
Model
Omni Vision OV7950
Size and type of the matrix
1/4'' CMOS
Size of the array of pixels
656 x 492
Sensitivity
3.0V/Lux-sec @ 5600K
Signal / noise rate
48dB
Mechanical and performance
Camera weight
21 g.
Dimension (LxHxW)
Ver. 1.3.2 – 34 x 32 x 25 mm
Ver. 1.3.3 – 34 x 34 x 25 mm
Interface connector
on board MW-3M, on cable MU-3F
Board-to-board connector
PBD1.27-8A, PLLD1.27-8A
Operating temperature
from -20 ºС to +50 ºС
Optics
Focal length of the lens
2.5 mm
Angel of view
90º
Thread type
M12 х 1
IR filter on the lens
680 nm (day lens for color cameras)
Focus operation
by hand
Electrical specifications
Supply voltage
5V – 12V (the recommended voltage 5V)
Consumed current, not more
130 mA
Power consumption at 5V (12V)
0.65W (1.56W)
Video output
Video format
NTSC 525/60
Video output
75 ohm, scope 1V
Horizontal resolution
470 TVL
Stereo
3D format
interlaced 3D (field sequential 3D)
Frame rate for each eye
30 Hz
Minimum stereo base
17.5 mm
Adjusting the convergence
by hand