Product Overview

WARNING
THIS PRODUCT IS SOLD AS IS AND WITH ALL FAULTS. PROPER INSTALLATION IS
REQUIRED TO AVOID RISK OF FAILURE. WE MAKE NO WARRANTY OF ANY KIND FOR
THIS PRODUCT. USE THIS PRODUCT AT YOUR OWN RISK. WE WILL NOT PROVIDE FOR
REPLACEMENT OF THIS PRODUCT NOR WILL WE BE RESPONSIBLE FOR ANY DIRECT
OR CONSEQUENTIAL DAMAGES ASSOCIATED WITH THE USE OF THIS PRODUCT.
This product should only be used when no other installation option is available and then only
installed under controlled and supervised conditions. The following disclosure should be
considered when determining whether you should use brass sprinkler extensions as identied
in our full product catalog. The product is manufactured in ½” IPS and ¾” IPS sizes in “take
out” lengths of ½”, ¾”, 1”, 1 ½”, 2”.
This product has neither been tested nor approved by any agency or authority as being a
universally accepted product for the extension of sprinklers. The shortness of both the male
and females threads of the brass sprinkler extensions require ideal installation conditions to be
assured of successful use. Proper installation requires the proper use of tools and an adequate
amount of thread sealant as well as mating the extensions with properly threaded components
such as the sprinkler and the reducer to which the extension may be installed. Great care must
be taken not to over tighten the sprinkler/extension/reducer assembly. Over-tightening will
cause failure of the brass sprinkler extensions in almost every case. Evidence of failure may not
be visible by visual inspection. The absence of apparent leaks during hydro-testing may not
reveal product failure.
By installing this product you acknowledge that you have read this warning and disclosure and
that you understand the statements contained herein and furthermore accept responsibility for
use of this product.
WWW.FPPI.COM
Extension Nipples, Brass