Brochure

36
CUSTOMER SERVICE | TOLL FREE [phone] | FAX [phone] | www.fppi.com
SureTest
™
Inspector’s Test & Drain Valves
SureTest
™
Inspector’s Test & Drain Valves
The FPPI SureTest
™
Inspector’s Test & Drain Valve features heavy
duty bronze construction for extended service life. When not in
the closed position, the valve can be either fully open (full port), or
tested through a ½” restricting orifice. The valve features two large
and integral sight glasses allowing for maximum visibility when
operated. The compact and integrated form allow for installation
in both horizontal and vertical orientations in a small amount of
space.
Features
• Positive positioning of handle for OFF, TEST, or DRAIN
• Only 2 threaded connections
• Large, integral sight glass on both sides
• ½” (nominal) test orifice
• UL/ULc Listed EX4074
• FM Approved
Specifications
• Supplied with: ½” (nominal) test orifice
• Rated: 175 psi / 1210 kPa
Materials
• Gland Nut: Brass*, ASTM
• Lever Nut: Brass*, ASTM
• Seats: RTRFE
• Stem Packing: MPRTFE
• Stem Bearing: RTPFE
• O-Ring: BUNA-N
• Stem: PTFE
• Ball: Brass, ASTM B16, Chromium Plated
• Retainer: Bronze, ASTM, B584, UNS Alloy No. C84400
• Body: Bronze, ASTM B584, UNS Alloy NO. C84400
• Glass Retainer: Carbon Steel, Zinc Plated
• Stop Plate: Carbon Steel, Zinc Plated
• Sight Glass: Glass Tempered
• Detent Pin: Brass, ASTM B16
• Lever Assembly: Steel, zinc plated w/vinyl
*Contains lead. Not for use in water systems intended for human consumption.
06-850-00
Part No. Description in Pack Qty.
06-850-00 Test & Drain Valve 1 UL/ULc/FM 1
06-852-00 Test & Drain Valve 1¼ UL/ULc/FM 1
Valve Size Take Out A B C
in in mm in mm in mm in mm
1 4½ 114.3 2¾ 69.6 7.625 193.7 4 101.6
1¼ 5½ 139.7 3.37 85.6 8¼ 209.6 5 127
NOTE: DO NOT USE MORE THAN ONE SEALANT TYPE
PER THREADED CONNECTION. DO NOT OVER TIGHTEN
THREADS. OVER TIGHTENING WILL CAUSE LEAKS IN
THIS AND OTHER THREADED COMPONENTS.