Product Overview

ManualsBrandsFPPI ManualsFire Protection Valves2" FNPT Globe Valve (Cast Brass)

Speciﬁcations

Materials:

Cast Brass*

Body

Bonnet

Brass* ASTM B16:

Gland

Holder

Stem

Washer

Stainless Steel:

Nut

NBR Nancar N70

Rubber seat

JIS FC20

Hand wheel

Sizes:

½” IPS FxF

¾” IPS FxF

1” IPS FxF

1¼” IPS FxF

1½” IPS FxF

2” IPS FxF

*Contains lead. Not for use in

water systems intended for human

consumption.

3198 LIONSHEAD AVE

CARLSBAD, CA 92010

TEL + 1 760 599-1168

+ 1 800 344-1822

FAX + 1 800 344-3775

Description

Manufactured from cast brass*, our angle valves are for Trim or Drain

applications and are designed to be suitable for all sprinkler systems including

high pressure sprinkler systems. The soft seat design utilizes NBR Nancar N70

material or PTFE for positive sealing to 300 psi. The most common use for the

2” IPS size is as a system drain at the riser. May be used on both alarm valve

and shotgun type riser assemblies.

Installation

Installation of the Trim/Drain valves can be accomplished using normal

installation methods. It is important to “hold back” each component in the piping

assembly to prevent over-tightening of the previously installed component. Use

a suitable thread sealant such as PipeFit Thread Sealant with PTFE or FPPI

PTFE Pipe Thread Tape to as- sure a positive seal between the valves and the

installed pipe.

*UL/ULC Listed, 2R97.

Caution: Do not overtighten male threads into the valve body. Thread

damage or cracking of the valve body may occur.

WWW.FPPI.COM

½’’-2’’ IPS Angle

Globe Valves, UL/ULC Listed* 300 psi

Summary of content (1 pages)

PAGE 1
/2’’-2’’ IPS Angle Globe Valves, UL/ULC Listed* 300 psi Description Manufactured from cast brass*, our angle valves are for Trim or Drain applications and are designed to be suitable for all sprinkler systems including high pressure sprinkler systems. The soft seat design utilizes NBR Nancar N70 material or PTFE for positive sealing to 300 psi. The most common use for the 2” IPS size is as a system drain at the riser. May be used on both alarm valve and shotgun type riser assemblies.