Palapala a ka mea nona

FOZGOMETER V2 Azimuth Range Meter
Correct azimuth alignment of your phono cartridge’s
stylus assures the best sound and stereo imaging
from your records. To achieve the best performance,
your cartridge’s azimuth must be calibrated.
The FOZGOMETER V2 incorporates a very sensitive
“Log Ratio Detector” to measure the channel separation
and channel balance of your phono cartridge. It features
higher sensitivity, a new meter design, and AC or battery
power for more accurate azimuth calibration. Readings
are made directly from your tonearm. The FOZGOMETER
V2 optimizes your cartridge’s azimuth using the Analogue
Productions Ultimate Test LP.
Line contact and Micro Line styli have a very small groove
contact area as compared to elliptical styli, thus requiring
finer adjustment. Proper azimuth will result in the highest
channel separation and best channel balance.
The FOZGOMETER V2 measures channel separation and
channel balance as you horizontally adjust your cartridge’s
azimuth to get the best readings.
The very sensitive FOZGOMETER V2 can measure small
differences between the cartridge’s left and right channels,
based on the cartridge design and construction. Achieving
the closest measurements, even if not identical, will result
in higher performance and better sound.
Matching the readings for the 2 channels is the goal. The
strength of the readings, or how high the needle goes up
in the meter, is based on the cartridge’s generator design
and output. The strength of the readings is less important
than the close matching of the 2 channels.