User Manual
Table Of Contents
- One-Year Limited Warranty
- Safety Information
- 1 Using This Manual
- 2 Introductions
- 3 Getting Started
- 4.Vehicle Identification
- 5 Diagnostic Operations
- 6 Maintenance
- 6.1 Oil Service Reset
- 6.2 Electronic Parking Brake
- 6.3 Battery Replacement (BRT)
- 6.4 Diesel Particulate Filter (DPF) Regeneration
- 6.5 Throttle Body Alignment (TPS/TBA)
- 6.6 Steering Angle Sensor (SAS) Calibration
- 6.7 Continuous Variable Transmission (CVT)
- 6.8 Gear Learning
- 6.9 Tire Pressure Monitoring System Programming
- 6.10 Odometer
- 6.11 Injector Coding
- 7 OBDII/EOBD Operations
- 8 System Setup
- 9 Update
46
NT6X4Elite Series User’s Manual_English_V1.02
Figure 9-21 Sample Download Screen
5. Click the check box(es) in front of the software(s) you wish to update and then click the Upgrade
button on the top of the software(s) to download.
Figure 9-22 Sample Upgrade Check Screen
6. When Upgrade button is clicked, it begins to download. And you can check the Current Status. If
the Current Status shows Downloading, please do not close the update application.
Figure 9-23 Sample Updating Screen
7. When all the items are updated, an “All software downloads are successfully installed!”
message displays. Please click OK to confirm.