User Manual
Table Of Contents
- One-Year Limited Warranty
- Safety Information
- 1 Using This Manual
- 2 Introductions
- 3 Getting Started
- 4.Vehicle Identification
- 5 Diagnostic Operations
- 6 Maintenance
- 6.1 Oil Service Reset
- 6.2 Electronic Parking Brake
- 6.3 Battery Replacement (BRT)
- 6.4 Diesel Particulate Filter (DPF) Regeneration
- 6.5 Throttle Body Alignment (TPS/TBA)
- 6.6 Steering Angle Sensor (SAS) Calibration
- 6.7 Continuous Variable Transmission (CVT)
- 6.8 Gear Learning
- 6.9 Tire Pressure Monitoring System Programming
- 6.10 Odometer
- 6.11 Injector Coding
- 7 OBDII/EOBD Operations
- 8 System Setup
- 9 Update
32
NT6X4Elite Series User’s Manual_English_V1.02
● Beep Set
●
Display Test
● Keypad Test
● About
8.1 Select Language
Selecting Language opens a screen that allows you to choose system language. The scan tool is set
to display English menus by default.
To configure system language:
1. Scroll with the arrow keys to highlight Language from Settings menu and press ENTER key.
Figure 8-1 Sample Settings Screen
2. Press left and right arrow key select a language and press the ENTER key to confirm. Press the
Back key to exit and return.
Figure 8-2 Sample Language Selection Screen
8.2 Change Units
Selecting Unit opens a dialog box that allows you to choose units of measure.
To change the unit setup:
1. Scroll with the arrow keys to highlight Units from Settings menu and press the ENTER key.