User Manual
Table Of Contents
- One-Year Limited Warranty
- Safety Information
- 1 Using This Manual
- 2 Introductions
- 3 Getting Started
- 4.Vehicle Identification
- 5 Diagnostic Operations
- 6 Maintenance
- 6.1 Oil Service Reset
- 6.2 Electronic Parking Brake
- 6.3 Battery Replacement (BRT)
- 6.4 Diesel Particulate Filter (DPF) Regeneration
- 6.5 Throttle Body Alignment (TPS/TBA)
- 6.6 Steering Angle Sensor (SAS) Calibration
- 6.7 Continuous Variable Transmission (CVT)
- 6.8 Gear Learning
- 6.9 Tire Pressure Monitoring System Programming
- 6.10 Odometer
- 6.11 Injector Coding
- 7 OBDII/EOBD Operations
- 8 System Setup
- 9 Update
27
NT6X4Elite Series User’s Manual_English_V1.02
Figure 5-22 Sample Custom List Selection Screen
3. When finished selection, use the function key OK to display selected items.
Figure 5-23 Sample Live Data Screen
6 Maintenance
This section gives brief instructions of the most commonly required service and maintenance
operations. Typical service operation screens are a series of menu driven executive commands.
Follow on-screen instructions to complete the operation.
Available service and maintenance options include:
●
Oil Light Reset
● EPB Service
● Battery Configuration
●
DPF Regeneration
● TPS/TBA
● SAS Calibration
●
CVT
● Gear Learn
● TPMS Programming Service
●
Odometer
● Injector coding
To start a test:
1. Scroll with the arrow keys to highlight Maintenance from the main menu and press the ENTER key.
A list of available services display.