Safety Instructions

Wireless Projection
28
Operation Guide
The setting in the backstage management page of the Product is the same with two steps above;
click Settings
Step 4: Find the name of
target wireless network,
double click to enter the
next option, as shown in
the diagram
Step 5: Based on the step
above, enter the interface as
shown in diagram below, enter
the password in the Password
option and click Password
Step 6: The Product displays the
interface as shown in diagram
below. Implement projection of
device, please refer to Method 1
for the details.
1. Customize name, click Submit (make
sure to restart to take effects)
2. Customize overscanning, click
Submit (do not alter) and each pixel on
the screen corresponds to the pixel of
displayed image (strictly speaking, it
corresponds to the output points of play
device).
3. Customize HDMI output resolution
and click Submit
4.Select WIFI frequency band of
software, 5G is not supported unless it
has 5G network, and then click Submit
(make sure to restart to take effects)
5.Customize password and click Submit
6.Select IOS version (iPhone/Samsung)
and click Submit
7.Select version upgrade, click Upgrade
and restart
8.Recover factory settings and click
Restore to restart