Safety Instructions

Wireless Projection
25
Operation Guide
Method 1: Projection via hot spot of projector
1. Power on the Product, enter the wireless
projection interface and the default interface is
as shown below. Current SSID: The default hot
spot name of the Product. Current password:
The default WiFi password.
2. When devices, such as mobile phone, tablet
PC and computer, are connected to SSID, it
will jump to the interface as shown in diagram
below; SSID is the equipment name of the
Product;
Fig. 1 Fig. 2
Device connection method:
Android mobile phone:
Step 1 Step 2 Step 3
Enter the setting menu of
mobile phone, find wireless
network option and find
“Current SSID” as shown in
Fi
g. 1, enter password and
connect it.
Enter the setting menu of
mobile phone – Bluetooth and
dev
ice connection – Set
connection preference –
Projector screen option.
Search the device name as
shown in Fig 2 and click
“Connect
” and wait for
completion of projection.
Note: The projection screen name and position in menu setting can be different depending on the
brands of Android mobile phones; please consult the dealers of mobile phones for details. Besides,
the Miracast connection of Huawei mobile phone also supports mobile phone and computer mode,
as well as DLNA connection method. Android 4.0 and above are supported.
Network name
Device name