Safety Instructions

Basic
20
Image
Enable/disable
•The Product can display the test pattern to help you confirm the color correctness of projected
image
Blank timer
Disabled/5min/10min/15min/20min/25min/30min
•Draw the attention of audience to the demonstrator during demonstration. You can press “Blank
screen” to hide the screen image. Press any key on the Product or remote controller to recover the
image display. When image is hided, the lower right corner of screen will show blank display text.
Message
Enable/disable
•Close, display or not display the signal search box
Startup image
Default/black/blue
Direct startup
•Power on and the Product will start automatically
Auto shutdown
No display permanently/5min/10min/15min/20min/25min/30min
•Based on this function, the Product will shut down automatically at the set time if no input signal
is detected, to avoid unnecessary waste of service life of light source
Sleep timer
No display permanently/30min/1h/2h/3h/4h/8h/12h
•Based on this function, the Product will shut down automatically at the set time to avoid
unnecessary waste of service life of light source
Power saving
Enable/disable
•If no input signal is detected within 5min, the Product will reduce the power consumption to
avoid unnecessary waste of service life of light source; you can decide whether shut down the
Product when reaching the set time.